Introduction:
DKFILTER produces the HYDAC hydraulic oil filter 0160 D 020 W/HC Replacement- Type D for Pressure Line Filtration,it’s made of wire mesh material that can be cleaned and reused,saving much more cost. 0160 D 020 W/HC oil filter element is a stainless steel wire mesh filter element for bearing lubrication systems (eg: turbine bearings),water filtration,treatment plants for cooling emulsions and protection filters.
General Datas:
| Item | Value |
|---|
| Collapse stability | 20 bar |
| Temperature rang | -30℃ to +100℃ |
| Flow direction | 20,50,100,200um(other on request) |
| Bypass cracking pressure... | Pressure filter element(“D”):Without bypass valve as standard |
| Bypass cracking pressure | Pressure filter element (“R”):standard 3 bar(others on request) |
| Category of filter element | Can be cleaned to extend service life |
Filter Material:
We make 0160 D 020 W/HC hydraulic oil filter use a single unit structure to reduce the number of gaskets and improve overall reliability. 0160 D 020 W/HC oil filter cartridge have one or more layers of pleated media inside molded fiberglass laminated cylinders to provide a larger particle filtration surface area. Use pleated ripples and separate materials to keep the pleats open for full use.
• All glassfiber media aggregator combines deep particle filtration with deep coalescence structure.
• The all-glass fiber design has a continuous thinner dielectric layer to achieve deep filtration of particles.
• The composite glass fiber and fold medium coalescers mainly remove particles from high surface area fold cores.
Filter Feature：
We make 0160 D 020 W/HC oil hydraulic filter is Beta grade. Excellent filtration performance. The Beta X = 1000 number means that for every 1000 particles of size x in the fluid, on average only one particle will pass through the filter.
Filter Cleaning:
On W and W/HC filter elements,the warp and weft yarns are of equal strength,creating uniform openings in the screen.Filtered with stainless steel wire mesh filter element,the pressure drop is lower.Stainless steel pleated square mesh is supported in single or multiple layers.
We make 0160 D 020 W/HC oil filter cartridge stainless steel mesh element can be cleaned again after use.However,only a certain cleaning level (percentage) can be achieved.For best results,components should be cleaned using professional equipment.But cleaning results are unpredictable.It depends a lot on various conditions
(1) Dip the filter element in light oil and rotate thoroughly.
(2) Clean off dirt by scrubbing the element with a brush parallel to the pleats.
(3) Clean off dirt with an air spray gun.
(4) Rinse well.
(5) Dry using an air spray gun.
Notes:
It must be noted that during each cleaning process,approx. 80-90% of the initial filter area can be recovered each time,that is,after 4-5 cleaning cycles,the result (cleaning cost and service life) may not be economical.We will be happy to send you the operating manual with further information on cleaning.
Application:
0160 D 020 W/HC oil filtration element can be used for many types of industrial fluids:
filtering hydraulic fluid
diesel
machining fluids
lubricating oil
coolants
gasoline
process fluids
turbine and compressor lube oils
synthetic lubricants etc.
Test Standards:
Before delivery, Our manufactured 0160 D 020 W/HC hydraulic oil cartridge will be tested and follow the standards:
ISO 2941 Collapse & Burst Resistant
ISO 2942 Fabrication & Integrity Test
ISO 2943 Material Compatibility with Fluids
ISO 3724 Flow Fatigue Characteristics
ISO 3968 Pressure Drop vs. Flow Rate
ISO 16889 Multi-pass Performance Testing
0160 D 020 W/HC hydraulic oil filter element replacement
