Introduction:
I-62285TB parker velcon coalescer cartridge is used to remove particulate contaminants from hydrocarbon fuels and condense highly dispersed emulsified water particles to purify fuel oil. The I-62285TB screw base end coalescer uses a single unit structure to reduce the number of gaskets and improve overall reliability. The all-glass fiber design has a continuous thinner dielectric layer to achieve deep filtration of particles.
Performance Parameters:
Item | Value |
---|
Length | 28.5 inches |
Inside Diameter | 3.5 inches |
Outside Diameter | 6.0 inches |
Filtration accuracy | 99.9% |
Maximum Operating Temperature..... | 66-71°C, 150-160°F..... |
Seal | Buna-N |
Filter material | Synthetic, Fiberglass |
End Caps Configuration..... | Threaded Base |
Structure Materials:
• Stainless steel metal support
• Polymeric outer drainage layer to prevent liquid reentrainment
• Resin bonded glass fiber coalescer media designed in a pack to handle large quantities of liquid
• Oleophobic/hydrophobic treatment to improve liquid drainage,protect from liquid slugs and minimize saturated pressure drop
Performance Features:
• Field proven performance
• Used as a primary element in filters/separators
• One-piece design is easy to install and replace
• A threaded base or open end cartridge is optional
• Remove particles and condense water into large drops
• Choose all-glass fiber media or a combination of glass fiber and pleated media
• Cost-effective removal of particles and emulsified water from hydrocarbon fluids
• Ongoing qualification testing to meet changing commercial and military requirements
Filter Material:
We make I-62285TB aviation fuel coalescer filter cartridge use all glassfiber media aggregator combines deep particle filtration with deep coalescence structure.
• Use pleated ripples and separate materials to keep the pleats open for full use.
• The composite glass fiber and fold medium coalescers mainly remove particles from high surface area fold cores.
• Have one or more layers of pleated media inside molded fiberglass laminated cylinders to provide a larger particle filtration surface area.
I-62285TB Application:
I-62285TB coalescing filter element is mainly used for coalescing emulsified water and removing particles from hydrocarbon fluids. The biggest single application is filtration of aviation jet fuel. They are also used in other types of fuels, process flows in refineries and petrochemical plants, and condensate streams to produce natural gas.
Other liquids can be separated if they are immiscible,have different specific gravity,and do not present a high concentration of surface active.As a rule of thumb,if the mixture samples are easily separated within an hour or two,a coalescing device may be used.If the mixture does not separate after 24 hours, coalescence may not work.
Work principle:
I-62285TB high-efficiency coalescers merge small droplets of liquid into larger ones as the fluid stream passes through several layers of filter media,each with progressively larger pores.
As droplets compete for the open pores,they coalesce forming larger droplets.These larger droplets are easier to separate from the continuous phase fluid.
The I-62285TB coalescer size and type are determined by numerous factors:physical properties of the fluid,flow rate,process conditions and chemical compatibility with process fluids and additives.
Test Standards:
Before delivery, Our manufactured I-62285TB coalescer filter cartridge will be tested and follow the standards:
ISO 2941 Collapse & Burst Resistant
ISO 2942 Fabrication & Integrity Test
ISO 2943 Material Compatibility with Fluids
ISO 3724 Flow Fatigue Characteristics
ISO 3968 Pressure Drop vs. Flow Rate
ISO 16889 Multi-pass Performance Testing
Customized Processing:
We corporation are excellent coalescers cartridge filter manufacturer
Parker & Velcon
PECO & Facet
Faudi
Pall
Other types are available on request